Temperature Backlight Indicator; Check The Memory - Medline MDSTH1002 Manual Del Usuario

TEMPERATURE BACKLIGHT FEVER
INDICATION
This thermometer has a fever alarm indicator light on the end of
the thermometer opposite from the probe sensor. This light will
indicate if the measurement detects a fever:
Green (Normal): 96.0°F - 99.3°F (35.6°C - 37.4°C)
Slow Blinking Red (Raised): 99.4°F - 100.3°F (37.5°C - 37.9°C)
Fast Blinking Red (High): 'FE' will also display on the LCD, as
indicated in the picture at left. This is for results between
100.4°F - 109.3°F (38.0°C - 42.9°C).
HOW TO CHECK THE MEMORY
This thermometer can recall the past 9 measurements.
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the oldest
measurement is automatically deleted from the memory.
Press [MEM/SET] to check the memory number, temperature
and date. See figure on the left.
Press [MEM/SET] repeatedly to cycle through the temperatures
in the memory.
Press and hold [MEM/SET] to check the memory data.
Press and at the same time to return the device to
Waiting Mode.
Waiting mode
screen.
1-800-MEDLINE (633-5463) | medline.com 13