Care And Cleaning; Important Safety Information - Medline MDSTH1002 Manual Del Usuario

CARE AND CLEANING

To ensure accurate measurements, it is very important to keep
the probe tip clean and free of scratches. Finger prints, earwax or
dirt will affect the accuracy of the thermometer. In order to get an
accurate measurement, please clean the probe tip.
Gently wipe its surface with a cotton swab slightly moistened with
alcohol and immediately wipe dry with a clean cotton swab.
Use a soft dry cloth to clean the body of the thermometer. Never
clean the thermometer with an abrasive cleanser, thinner, benzene
or submerge the thermometer into water or other liquids.
After cleaning, place the thermometer in the protective case.
Store it in a clean, dry place at room temperature. Never expose the
thermometer to extreme temperatures, humidity, direct sunlight
or shock.

IMPORTANT SAFETY INFORMATION

Proper technique is critical in order to obtain accurate temperatures. Therefore, in
order to obtain an accurate measurement, please read this manual carefully before
using this thermometer.
• Use of this thermometer is not intended to substitute professional consultation by your
physician. Measurement results are for reference only. Contact your physician about any
known or suspected health concerns.
• The Infrared sensor must be kept clean, dry, and undamaged at all times to ensure
accurate measurements.
• Do not use the ear/forehead measurement mode for measurements other than for
human body temperature.
• Avoid measuring the ear temperature if the ear is inflamed or infected.
• If the temperature of the storage area differs greatly from that of the measuring
area, please allow time for the thermometer to equalize to the current environment's
temperature. For great differences in environment temperatures, let the thermometer
equalize for 30 minutes before use.
4 MDSTH1002 (PIC-00364) | Revision: 09/17/20