Before Use - Medline MDSTH1002 Manual Del Usuario

BEFORE USE

1. To achieve accurate measurements, it is very
important to check that the infrared sensor is clean
before each use.
To clean the sensor, gently wipe its surface with a
cotton swab slightly moistened with alcohol and
immediately wipe dry with a clean cotton swab.
After cleaning, allow at least 20 minutes of drying time
before taking temperatures.
2. Please open the battery cover and move the
insulating piece when you use the thermometer for the
first time. After its removal, the thermometer will turn
on automatically, and the LCD display will show similar
to the bottom picture on the left-hand side of this page.
Notes on the LCD Screen:
1) In measuring mode and memory mode, the LCD
display is normal. In waiting mode and setting mode,
the LCD display is reversed.
2) In waiting mode, the LCD display circulates between
time, date, and room temperature.
1-800-MEDLINE (633-5463) | medline.com 9