How To Operate The Transceiver; Band Selection - TTI TCB-660 Manual De Instruciones

8. How to Operate the Transceiver

1) Make sure the microphone is connected to the
microphone jack.
2) Make sure the power cable is connected properly.
3) Make sure the antenna is connected to the antenna
receptacle.
4) It is better to put the squelch control knob turned fully
counter-clockwise.
5) Turn on the transceiver and control the volume level.
6) Adjust the squelch control knob to the optimum level.
7) Select your desired channel.
8) To transmit, press the PTT button and speak to the
microphone.
9) Release the PTT button to receive.

9. Band Selection

information. The band chart for each area is as follows.
Press AM/FM button while the band information is blinking or
wait for 5 seconds to complete the selection and go to the
transmit and receive mode. This transceiver has "EC" band
setting when it is shipped out from the factory.
Settings Display
EC
E
F
TCB-660
Pressing AM/FM button and Scan
button at the same time, turn on the
transceiver.
The LCD display offers you the band
Europe 40 Ch FM 4W
Spain 40 Ch AM/FM 4W
France 40 Ch FM 4W, 40 Ch AM 1W
Band
11