Up Button; Am/Fm And Lcr Button; Scan And Lcok Button - TTI TCB-660 Manual De Instruciones

4) Up Button

Press this button briefly to select the channel one
by one that you like to use.

5) AM/FM and LCR Button

When the transceiver is used in UK, UE, or EC
freequency band modes this button activates or
deactivates Last Channel Recall function. In all
other modes (where national regulations permit this)
this button allows user to switch between AM and FM modes
by momentarily pressing this button.
6) Scan and Lock Button
Scan : Press this button momentarily to start
scanning upward to catch any channels that are
occupied by others.
To activate/deactivate the channel scan, press the Scan button
briefly. The Scan icon will appear when the channel scan is
active. Scanning will only stop when you deactivate the scan
function.
The transceiver will scan through the whole transceiver
channels. If your transceiver detects a valid signal the scan will
pause for the period that has been set by the menu mode
setting (continuously receiving or 1-99 seconds for scan
receive time and immediate response or 1-99 seconds for scan
delay time).
If you press the PTT button when your transceiver detects a
signal, the radio will transmit on the same channel. Scanning
will resume after the scan receive time and/or the scan delay
time. Use the channel selector or quick up/quick down selector
to resume scanning immediately.
If you press the PTT button during scanning, the radio will
return to your original channel. Scanning will resume after the
scan receive time and/or the scan delay time. Use the channel
selector or quick up/quick down selector to resume scanning
immediately.
TCB-660
7