Recalling Measurements In Memory; Description Of Display Symbols - HealthSmart 04-825-001 Manual De Instrucciones

Recalling Measurements in Memory

You can recall up to 60 measurements in the memory. These
measurements can be shared with your physician or trained healthcare
professional.
1. Press and release the MEMORY button. It will show how many
measurements are stored within the bank, followed by the last
result, Fig. 1.
2. Press the MEMORY button again to scroll through the saved
measurements. After you've scrolled through all the readings, the
unit will automatically turn off.
NOTE: When the number of readings exceeds 60, the oldest data will
be replaced with the new record.
To erase all stored measurements:
1. Press and release the MEMORY button. The unit will display how
many measurements are stored within that bank.
2. Press and hold down the Memory button until two horizontal lines
flash. This indicates that all measurements within the selected
memory bank have been erased, Fig.2.
Fig. 1
Fig. 2
16

Description of Display Symbols

SYS
Indicates a measurement within Stage 3
Hypertension.
DIA
SYS
Indicates a measurement within Stage 2
Hypertension.
DIA
SYS
Indicates a measurement within Stage 1
Hypertension.
DIA
Appears when batteries should be replaced.
-- Description of Display Symbols Continued
17