Troubleshooting; Care And Maintenance - HealthSmart 04-825-001 Manual De Instrucciones

Description of Display Symbols
Shows the pulse rate per minute.
Occurs when an error was made during
measurement.
Appears when there is an irregular heartbeat detected
during measurement.
Appears when the cuff is unstable or it has too much air left
in it. Once the arrow stops flashing, the unit is ready to take a
measurement.
Appears when a measurement error has occurred. Restart the
measurement.
Appears when recalling a measurement from memory.
18

Troubleshooting

If any abnormality occurs during use, please check and correct the following:
Condition
Display is blank when power is on.
Measurement incomplete or
abnormally low or high values
displayed.
Measurements are different from
those typically measured by
physician or every measurement
reading is different.
EE Symbol displays

Care and Maintenance

1. Only use a soft, dry cloth to clean your blood pressure monitor.
2. Avoid using any types of liquids on the monitor or cuff.
3. Store your monitor in the provided storage case when not in use.
4. Do not store the unit where it will be exposed to direct sunlight, dust
or humidity. Avoid extreme temperatures.
5. Never disassemble the monitor or cuff.
6. Dropping or subjecting your blood pressure monitor to strong shocks
should be avoided.
7. Remove batteries prior to storing.
Correction
Check and correct the polarity
of the installed batteries. Reinstall
or replace batteries.
Review and follow 'Applying Your
Blood Pressure Cuff' and 'Taking
Your Blood Pressure Reading'
sections. Replace the batteries.
Remember, blood pressure readings
are influenced by physical and
mental conditions and/or even the
time of day. Daily measurement
recordings should be interpreted by
your physician.
Do not talk or move during the
measurement. Review "Applying Your
Blood Pressure Cuff" section.
19