Operation; Attaching The Push Handle; Transport Position / Working Position; Filling The Detergent Solution - Kärcher Tornado BR 400 Instrucciones De Servicio

BR 400

1. Operation

Attaching the push
handle
Transport position /
working position
Transport
Working
Filling the detergent
solution
8
• On unpacking the unit you will find the upper push handle folded
down.
• Position the lower push handle half vertically, attach the upper half
and screw together using the supplied screws and nuts.
Caution:
Do not clamp the cable during assembly.
A switch is located on the side of the unit which can be locked in
11 positions.
Caution:
The transport or working position can only be selected when the push
handle is in a vertical position.
• Transport position
Pull switch and rotate in an anti-clockwise direction as far as the stop.
Note: The unit remains on the transport wheels even when the push
handle is folded.
• Working position
Pull switch and rotate in a clockwise direction as far as the stop.
Note: Intermediate positions can be selected for sensitive floor surfaces
or for light scrubbing.
Caution:
When the push handle is folded, the complete weight of the unit rests
on the brushes. While the unit is not being used, position the push
handle vertically to avoid damaging the brushes.
Note: Please comply with the manufacturer´s metering instructions and
ensure that the detergent solution is well mixed.
• When filling using a hose or a bucket, open the cover of the fresh
water container and fill with water and detergent. Replace the cover
after filling.
• Remove fresh water container when filling under a faucet. Be sure
to pull off the attached hose first. After filling, replace the container,
hose and cover.
English