Tabla de contenido
Publicidad
Assembly Instructions and Parts List
System Connection
1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 12.
Figure 12 - Gun/Lance Connection
2. Ensure that the power switch is in the
"OFF" position.
3. Attach the high pressure hose and
gun assembly to the unit.
Electrical Cord
with GFCI
13 mm
Garden
Hose
Figure 13 - Connection Call-Outs
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Handle/Detergent
Tank
Outlet
3
PW167612AV
Gun
High
Pressure
Hose
www.chpower.com
Publicidad
Tabla de contenido
