System Connection - Campbell Hausfeld PW1345B Instrucciones De Montaje Y Lista De Piezas

Tabla de contenido

Publicidad

Assembly Instructions and Parts List

System Connection

1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 4.
Figure 4 - Gun/Lance Connection
2. Ensure that the power switch is in the
"OFF" position.
3. Attach the high pressure hose and
gun assembly to the unit.
GFCI Plug
13 mm
Figure 5
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Power
Switch
Inlet (See Garden
Hose Connection
page 1)
3
PW1345B
Gun
High
Pressure
Hose
Outlet
www.chpower.com

Publicidad

Tabla de contenido
loading

Tabla de contenido