System Connection - Campbell Hausfeld PW138012AV Instrucciones De Montaje

Assembly Instructions and Parts List

System Connection

1. Insert lance into the gun and turn
clockwise to positive stop as shown in
Figure 7.
Figure 7 - Gun/Lance Connection
2. Ensure that the power switch is in the
"OFF" position.
3. Attach the high pressure hose and
gun assembly to the unit.
GFCI Plug
13 mm
Garden
Hose
Figure 8 - Connection Call-Outs
Detergent Fill
Inlet
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
6. Turn water on.
7. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
8. Turn the "ON/OFF" switch to the
"ON" position.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Detergent
Tank
Outlet
3
PW138012AV
On/Off
Gun
Switch
High
Pressure
Hose
www.chpower.com