System Connection - Campbell Hausfeld PW132000AV Instrucciones De Montaje Y Del Uso

Assembly Instructions and Parts List

System Connection

1. Insert short lance into gun and turn
clockwise to positive stop. If you
experience difficulty, unscrew the
large collar on gun. This will allow
you to see connection points.
Figure 4 - Gun/Lance Connection
2. Insert adjustable lance into short
lance and turn clockwise to positive
stop as shown in Figure 4.
3. Ensure that the power switch is in the
"OFF" position.
13 mm
Figure 5
GFCI Plug
4. Attach the high pressure hose and
gun assembly to the unit.
5. Connect garden hose as explained
under Garden Hose Connection
Instructions.
6. Plug the power cord into a grounded
120V outlet, that is on a dedicated
circuit.
7. Turn water on.
8. Depress and hold the trigger on the
gun for one minute to release pres-
sure and remove any air trapped in
the system.
9. While squeezing the trigger, turn the
"ON/OFF" switch to the "ON" posi-
tion.
NOTE: REFER TO PRODUCT MANUAL
FOR OPERATING INSTRUCTIONS
Power
Switch
Inlet (See Garden
Hose Connection
page 1)
3
PW132000AV
Gun
High
Pressure
Hose
Outlet
www.chpower.com