Interface - Control Panel; Interface - Smartphone/Tablet -Ios Or Android Operating Systems - MAHLE VCT Manual De Usuario

20
VCT Ozone Generator
Use and maintenance manual

Interface - Control panel

START Quickly press START once to select the program, sliding the red Led
(button) over the desired program (in sequence P1 - P2 - P3).
Long press on the START button for 2 seconds allows starting the se-
lected program after a 5 second countdown, marked by acoustic signals
"beeps" and by the Status Led flashing green.
Status Led Green with 2 rapid flashes and pause (during the first 5 seconds with
acoustic signal "beep") - procedure in progress.
Green (with intermittent acoustic signal "beep") - procedure completed.
Green (with intermittent acoustic signal "beep") and
P1 On
P2 Off
P3 On
- procedure correctly completed but Ozone level in the cabin is above
safety threshold. Wait 10 minutes before opening the doors.
Blinking red – presence of errors (see table in "trouble-shooting"
Chapter).
P1 (Led) 20 min program, starting when ozone concentration value is reached.
P2 (Led) 40 min program, starting when ozone concentration value is reached.
P3 (Led) 60 min program, starting when ozone concentration value is reached.
5.5
Interface – smartphone/
tablet –iOS or Android
operating systems
The equipment can be controlled via the ded-
icated "O3 EASY" App for smartphone/tablet
(with iOS or Android operating systems): via
® ®
bluetooth , the app allows you to manage the
®
ozone generator and monitor its processes,
even remotely.
To install the app on your smartphone/tablet, vis-
it the app store of your own operating system:
For iOS - App Store
n
For Android - Play Store
n
Inside the store, in the "search" bar, search for
the App by typing the following words:
n O3 Easy
when the search is over, select the O3 Easy app
identified by the icon below
and follow the store instructions to install it.
21
App description:
App allowing to manage the ozone generator
and monitor its processes, even remotely. Al-
lows to generate a report and send it by mail as
PDF file.
Minimum requirements for smartphone/tablet:
are described in the stores.
Once you have installed and launched the App,
you need to enable:
Bluetooth connection.
n ®
n Access to camera.
as described in the user manual of your device.
To pair the equipment via bluetooth , in the O3
®
Easy App, follow the instructions and scan the
QR code that's on the equipment's nameplate.
Fig. 5 Initial bluetooth pairing with
®
QRcode Page
In order to pair the equipment via bluetooth