Trim: Placement of added weight can influence performance of the craft and may adversely affect
stability of the vessel. Place heavy objects as close as possible to the centerline of the craft. Added
weight of equipment and crew should be positioned such that the kayak remains level in the water, both
fore & aft, and side to side.
Maintain Working Pressure: Air pressure is temperature dependent. Always confirm proper working
pressure before use. Be aware that changing temperatures can cause critical over or under-inflation.
Leaving the product in the sun may quickly affect the internal pressure causing permanent damage. If you
must leave the product, find a shady area, release some air, and leave product upside down to minimize
thermal over-inflation.
If product shows signs of instability or pressure loss, discontinue use until product is returned to working
pressure and/or repairs made.
Paddling - First Steps:
1. Place product in the water in an area protected from wind and boat traffic. Boarding conditions will
vary by site but if uncertain, board in shallow water with solid footing and a stable handhold to make
entry easier. If a solid handhold is not available, brace paddle across cockpit in front of user while
boarding and sitting. Always step into the center of the boat and stay low to avoid tipping.
2. Consider prevailing conditions such as wind, waves, tides, currents and other environmental factors in
planning route. Always be aware of weather and tide/ current changes that may affect return to safety.
3. Maintain a safe distance from sharp rocks, docks, boats, exposed or submerged trees, muscles,
barnacles and any other item that may cause damage to this product. Although this product is extremely
durable, avoid contact with sharp objects that may cut or puncture hull.
Transportation: One of the best features of high-quality inflatable kayaks is that they are extremely
portable. When packed into original storage bag this product fits easily into a closet for storage and the
back of most cars or motorcycles for transport.
A well-packed kayak can typically go on most airlines without oversize baggage charges. A 4-piece
Aquaglide paddle will ensure paddle fits in the bag too. This TPU Ultralight kayak should be placed inside
a backpack or other luggage for airline transport.
CARE & MAINTENANCE
Proper cleaning, maintenance, and storage is essential to help prolong the life of your product. Do not
use petroleum-based cleaners on this product. Improper use of a pressure washer can damage or
destroy the product.
Basic Cleaning: Always rinse product thoroughly with fresh water after use in salt water or any water
containing large amount of sediment or algae. This helps prevent buildup of dirt particles which can
accelerate wear.
Difficult Cleaning: For deeper cleaning, use sponge with mild soap and fresh water. Check with your
distributor, or on our website, Aquaglide.com for TPU-compatible cleaning solutions.
Replacement parts: Items like pumps, valves, straps and other accessories can occasionally wear out
and need replacement to maintain the full function of your product. Check with your distributor, or on our
website, Aquaglide.com for available parts and replacement instructions.
STORAGE
Clean, Protect, Dry: Clean product before storage. Confirm product is completely dry before folding.
Deflate & Fold: Deflate product completely. Leave valves open to vent trapped air during folding. Fold
deflated product in similar manner to original packaging. If uncertain, fold side tubes inward lengthwise,
then flat roll from front to back - toward the valve(s). Remove seat and other accessories from hull for
tighter packing. Place in original storage bag, squeeze air out and seal top of bag by flat-rolling two times
before clipping ends together.
Storage: Store the product out of direct sunlight and protect from environment in a clean, dry location
such as a sealed closet, crate or container to prevent against rodent damage. Never store in a damp
location or at temperatures below 40 F (4 C).
8
www.aquaglide.com