Speakers - Yamaha RX-V1300RDS Manual De Instrucciones

SET MENU
13 DISPLAY SET
13 DISPLAY SET
≥ D I M M E R ... ... ... ... ... ... ... ... ... 0
O S D S H I F T ... ... ... ... ... ... 0
G R A Y B A C K ... ... ... A U T O
I DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
I OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Press i to lower the position of the OSD.
Press j to raise the position of the OSD.
I GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there's no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
Choices: AUTO, OFF
Initial setting: AUTO
14 MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other settings on this unit.
Choices: ON, OFF
Initial setting: OFF
14 MEMORY GUARD
- / + : S e l e c t
Select ON to protect the following features:
• DSP program parameters
• All SET MENU items
• Center, rear speakers, rear center, and subwoofer levels
• The on-screen display (OSD) mode
Notes
• When "14 MEMORY GUARD" is set to ON, you cannot use
the test tone.
• When "14 MEMORY GUARD" is set to ON, you cannot select
any other SET MENU items.
66
0109V1300_56-68_EN-GB.p65
O F F O N
/ : E x i t
66
15 6CH INPUT SET
Use this feature to set the direction of the signals input
into the center and subwoofer channels when the source
component is connected to the 6CH INPUT jacks.
I 15A CENTER to (direction of the
center channel signals)
This item sets the direction of the signals input into the
CENTER jack.
Choices: CENTER, MAIN
Initial setting: CENTER
15A CENTER to
C E N T E R M A I N
CENTER
The input signals are output from the center speaker.
MAIN
The input signals are directed to the main L/R speakers
with same level.
I 15B SWFR to (direction of the
signals input into the subwoofer)
This item sets the direction of the signals input into the
SUBWOOFER jack.
Choices: SWFR, MAIN
Initial setting: SWFR
15B SWFR to
S W F R M A I N
SWFR
The input signals are output from the subwoofer.
MAIN
The input signals are directed to the main L/R speakers
with same level.
2002.11.07, 12:09