miniland baby humitouch pure Manual Del Usuario página 17

SYMPTOMS
Only a little
vapour comes out
of the nozzle
Strange noise
Other operational
failures
6. MAINTENANCE
In order to always keep the product clean:
∙ Use purified water.
∙ Regularly clean the base of the unit, the water tank, and the transducer accordiAlways
change the water in the water tank with clean water every day, in the event that it has
not all been used during normal operation.
∙ Always empty the water tank when it is not being used.
- Cleaning the water tank (every 2 - 3 weeks):
Unscrew the water tank's lid and rinse the water tank with water to remove any lime
deposits.
If you deem it necessary, use vinegar dissolved in water to remove any tough deposits
of lime. Alternatively, there are several cleaning solutions on the market for removing
lime which are suitable for humidifiers. Always follow the manufacturer's instructions
when using this type of product.
- Cleaning the hollow in the base (once a week):
If any lime deposits have formed in the hollow in the base, remove them with a soft cloth
dampened with a neutral cleaning agent or vinegar and rinse with water.
In the event of lime being deposited in the area of the transducer, add some drops
of vinegar to the surface of the transducer and allow this to take effect for two to five
minutes. Remove any encrusted lime from the surface with a brush. Use a clean cloth
to properly dry the transducer. Alternatively, there are several cleaning solutions on
the market for removing lime which are suitable for humidifiers. Always follow the
manufacturer's instructions when using this type of product.
- Cleaning the exterior of the humidifier:
Use a cloth and water no hotter than 40 °C in temperature to clean any marks from the
exterior of the device. The vapour outlet nozzle can be washed by running it directly
under a stream of water.
- Storing the humidifier:
When you are not going to use the device for an extended period of time, completely
empty the water tank. Clean the humidifier, carefully dry it, and package it in its original
packaging.
CAUSE
There is only a little water
remaining in the water tank
The transducer is dirty
Vibration of the surface
upon which the humidifier
has been placed
There is only a little water
remaining in the water tank
Get in touch with the Miniland technical service personnel
ACTION
Fill the water tank with water
Clean the transducer following
the instructions in point 6 of this
instruction manual
Place the humidifier on a flat
and stable surface
Fill the water tank with water
17
ENGLISH