Schluter Systems LIPROTEC-EASY Instrucciones Breves página 21

LIPROTEC
6. Ensure that the mobile device is not put on "silent".
> The LIPROTEC-P system can now be controlled via
the Schlüter
4.4 Teaching the radio remote control
The radio remote control included in the delivery has already
been taught in delivery state. This means that the Bluetooth
receiver has stored the connection data of the radio remote
control included in the delivery in its internal memory and the
radio remote control can be controlled via these signals.
In order for the Bluetooth receiver to be controlled via addi-
tional radio remote controls, such controls first need to be
taught. Even if the radio remote control included in the deliv-
ery loses its connection, it can be taught again in the manner
described below.
Illustrated manual
1. Disconnect the voltage supply of the power supply. Un-
plug the mains cable to this end.
2. Ensure that the power supply and Bluetooth receiver are
connected via plug connectors as described.
3. Plug the mains cable of the power supply into the intended
socket.
-LED-Color-Control app.
®
» "III" on page 4
EN
21