Emptying The Drum - Workshop WS0255VA Manual Del Propietário

WARNING:
!
Do not operate without filter cage
and float, as they prevent liquid from
entering the impeller and damaging
the motor.
WARNING:
!
Never leave Vac running while
unattended.
SP7102 WS0255VA WORKSHOP.indb 9
OPERATION
Powerhead
Assembly
Filter Cage
Float
Mechanism
(continued)

Emptying the Drum

WARNING:
!
To reduce the risk of injury from
accidental starting, unplug power
cord before emptying the drum.
1. Place Vac squarely on a stable surface,
such as ground, floor, bench, etc.
2. Remove the Powerhead Assembly of
the Wet/Dry Vac by pulling upward
on the Latches, located on each side
of the Vac. Lift off the Powerhead
Assembly.
3. Dump the Drum contents into the
proper waste disposal container.
9
Powerhead
Assembly
PUSH DOWN
PULL OUT
Latches (2)
Drum
7/10/19 10:57 AM