Emptying The Vac Canister; Blowing Feature - Workshop WS0500WM0 El Manual Del Propietario

emptying the vac canister

WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the vac canister.
1. With the vacuum removed from the
storage rack (see Removing Vac from
Storage Rack section), remove the Vac
motor assembly from the Vac canister
assembly.
2. Lay Vac motor assembly upside down
on a clean area while emptying Vac
canister.
3. Dump the Vac canister contents into
the proper waste disposal container.
oPeRATIoN (continued)

blowing feature

Your Wet/Dry Vac has the capability to be
used as a blower for yard work, patio
cleanup and workshop applications to
blow sawdust and other debris.
WARNING: Always wear safety
eyewear complying with ANsI Z87.1
(or in canada, csA Z94.3) before
using as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
cAuTIoN: Wear a dust mask if
blowing creates dust which might be
inhaled.
cAuTIoN: To reduce the risk of
hearing damage, wear ear protectors
when using the vac/blower for
extended hours or when using in a
noisy area.
1. Locate blowing port of your Vac.
2. Insert the locking end of hose into the
blowing port of the Vac.
3. (Optional) Attach extension wand to
swivel end of hose, then place the car
nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
13