Mobicool FR 35 AC/DC Instrucciones De Uso página 18

FR35 AC/DC
Fault
When operating from
the DC outlet:
The ignition is on
and the device is not
working and the LED
is not lit.
The display shows
an error message
(e. g. "Err1") and the
appliance does not
cool.
9 Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Possible cause
The DC outlet is dirty.
This results in a poor
electrical contact.
The fuse of the DC
plug has blown.
The DC fuse inside
the device has blown.
The vehicle fuse has
blown.
The appliance has
switched off due to an
internal fault.
Suggested remedy
If the plug of your cooler becomes
very warm in the DC outlet, either the
DC outlet must be cleaned or the
plug has not been assembled
correctly.
Replace the fuse in the DC plug, see
chapter "Replacing the plug fuse
(12/24 V)" on page 15.
This can only be repaired by an
authorised repair centre.
Replace the vehicle's DC outlet fuse.
Please refer to your vehicle's operat-
ing manual.
This can only be repaired by an
authorised repair centre.
Disposal
17