Faults Without Display On The Console - Windsor Saber Glide 30 Manual Del Usuario

Fault
Appliance cannot be started
Insufficient water quantity
Insufficient vacuum perfor-
mance
Insufficient cleaning result
Brushes do not turn
Optional overall lamp and/or
working lamp is not functioning
* The fuses are located in the flat insertion sockets on the wiring plate and can be accessed by opening the front panel.
14 English

Faults without display on the console

Remedy
Insert battery plug.
Set main switch to "1".
Check fuse F1, replace if required. *
Check battery; charge it if required.
Check fresh water level, refill tank if necessary.
Check hoses for blockages; clean if required.
Clean the fresh water filter.
Clean the seals between dirty water reservoir and cover and check for tightness, replace if required.
Clean the flat-fold filters at the suction support of the suction turbine.
Clean the squeegee blades on the squeegee tool, replace if required
Check suction hose for blockages; clean if required.
Check the suction hose for tightness; replace if required.
Check if the cover on the dirty water discharge hose is closed
Check the setting of the squeegee tool.
Set/ adjust contact pressure.
Check the brushes for wear, replace if required.
Reduce contact pressure.
Check if foreign matters block the brushes; remove foreign matter if required.
Check fuse F4, replace if required. *