Harbor Breeze 00856 Guia De Inicio Rapido página 5

ASSEMBLY INSTRUCTIONS
7. Align the notches on the fan motor (B) canopy
with raised areas inside the trim ring (C). Pop
the trim ring (C) into the canopy.
8. Remove and discard preassembled rubber
shipping stabilizer tabs (L) from fan motor (B).
Insert blade (D) into slot on fan motor (B).
Secure blade (D) with enhance plate (E) and
three blade screws (BB). Repeat for remaining
blades (D), enhance plates (E) and blade
screws (BB).
Hardware Used
BB
Blade Screw
9. Loosen two screws from switch housing plate
(H). Remove and save remaining screw.
7
Notch
C
Raised
area
8
B
x 10
E
L
E
9
H
Lowes.com/harborbreeze
8
ASSEMBLY INSTRUCTIONS
10. Insert wires from fan motor (B) through middle
hole in light plate (F). Attach light plate (F) to
switch housing plate (H). Align keyholes then
twist to lock. Replace previously removed screw
(Step 9, page 8) and securely tighten all screws.
Canopy
B
11. Loosen two preassembled screws from
light plate (F). Remove and save remaining
preassembled screw from light plate (F).
Slot
D
BB
12. Connect the WHITE wire from the light plate
(F) to the WHITE wire from the light fixture (G).
Connect the BLUE wire from the light plate (F)
to the BLACK wire from the light fixture (G).
Align the keyhole slots on the light fixture and
the light plate (F), and twist to lock. Replace the
previously removed screw (Step 11, page 9)
and securely tighten all of the screws.
Screw
10
B
F
Screw
Keyslot hole
11
F
JJ
12
F
G
Screw
Lowes.com/harborbreeze
9
H
Screw