Clearance Opening - Nogueira FTN-1000 Super G2 Manual De Instrucciones

2.1- Clearance opening

It is important to plan ahead the clearances,
leaving the necessary gaps in order to allow
the harvester to enter the harvesting area.
CLEARANCE MINIMUM WIDTH: 2.50 meters
(this measure may vary according to tractor
width and tires used).
We remind you that the harvester has not
been developed and it is not appropriate
to be manually fed. This procedure exposes
high accident risks to people who are
involved. Whenever there is the need of
manual opening of the clearance, harvest
laying down crop etc., use one of Nogueira
Static Line choppers, such as EN-6800.
IT IS FORBIDDEN TO
MANUALLY FEED THE
HARVESTER!
It is the producer (customer) sole responsibility
to plan the planting, so that the right spacing
for the harvest is respected. Nogueira
Máquinas will not be held responsible for
the inadequate use of its equipment. The
harvester must be used only with accordance
with this Manual, any other procedure must
be avoided.
ATTENTION!
Use a stationary chopper
whenever you need to manually
feed.
Never attempt to manually feed
the harvester.
Instructions Manual
2. Safety
CLEARANCE
15