Installing The Light Kit And Glass Shade - Hinkley CROFT Manual De Instrucciones

INSTALLING THE LIGHT KIT AND GLASS SHADE

Wire Connectors
Screws
Fig. 1
NOTE: Be sure the power is off before installing.
1
Remove 3 screws from the adapter plate.
Raise and hold the Detachable Switch housing w/LED light kit
2
close to the adapter plate and push the square wire connectors
together. (Fig. 1)
Adapter plate
Detachable
Switch Housing
w/LED Light Kit
Fig. 2
Raise the glass shade against the LED light kit and turn
1
clockwise until snug, DO NOT OVERTIGHTEN. (Fig. 2)
2
Restore power and your light kit is ready for operation.
Detachable
Switch Housing
w/LED Light Kit
Glass shade
©2021 Hinkley Lighting, Inc. | hinkley.com | 11