Channel List; Manual Register - Sylvania 6842THG Manual Del Propietário

CHANNEL LIST

The Channel List function lets you skip the unnec-
essary channels from the Channel registration list.
- 0
SETUP SETUP
ENTER ENTER
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Channel List".
Channel
Channel
Autoscan
Channel List

Manual Register

Antenna
• Press [ENTER].
3
Select the channel you want to skip.
• Using [ K / L ], select the channel.
Channel List Channel List
Highlight channels for
Ch Up/Down key selection.
Ch Select
ENTER
• Press [ENTER], and the highlight on the
selected channel disappears, then the channel
is set as skip. With [CH K / L ], you cannot
select the channel set as skip.
• If you want to receive the skipped channel,
select your desired channel and press
[ENTER].
• If you skip a major channel, you skip the minor
channels too.
NOTE:
• The channel with "DTV" indicated on the display is ATSC,
otherwise the channel is NTSC.
4
To exit the setup, press [SETUP].
STILL
SCREEN
MODE
INFO
DTV 6
DTV 6
DTV DTV 8 8
9
9
27
DTV 48
DTV 48
58 58
DTV 67
BACK
Watch/Skip Back
MANUAL REGISTER
You can register remainder of channels that were
not scanned by the Autoscan function due to the
bad reception status at the initial setting.
1 1 2 2
4 4 5 5
7 7 8 8
- - 0 0
SETUP SETUP
ENTER ENTER
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Manual Register".
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
• Press [ENTER].
3
Select the channel you want to add.
• Using Channel number buttons, select your
desired channel.
Manual Register Manual Register
For Analog channels,
select a channel to register
using number keys.
For Digital channels,
you must perform Autoscan function.
Ch Change
• Select "Register" with [ENTER].
4
To exit the setup, press [SETUP].
NOTES:
• If the setup is completed successfully, "Registered to the
channel list." is shown on the screen.
• If "Video1" is being used set up will not be completed suc-
cessfully. "Unavailable" will be shown on screen.
3 3
6 6
AUDIO
9 9
STILL
SCREEN
MODE
INFO
11
Register
BACK
Back
EN
15