Still Mode; Switching Audio - Sylvania 6842THG Manual Del Propietário

STILL MODE

You can freeze the image shown on the screen.
1 2
4 5
7 8
- 0
SETUP
1
Pausing image.
• Press [STILL], the image shown on the screen
is paused.
Still
• The audio is not paused and keeps on reading
out.
• If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
• The Still function will be released after 5
minutes.
2
Canceling Still function
• The Still function will be canceled by pressing
any button while Still function is working.
NOTE:
Press any key except [POWER] to cancel still mode.

SWITCHING AUDIO

This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
7 8
- 0
SETUP
TV
1
Switch the audio.
• Every time you press [AUDIO], the audio will
be switched as below.
When the broadcasting has all audio...
SAP / STEREO
SAP /
3
6
AUDIO
9
STILL STILL
SCREEN
MODE
AUDIO AUDIO
9
STILL
SCREEN
MODE
SAP / STEREO
MONO
When the broadcasting has SAP and stereo
audio...
SAP / STEREO
When the broadcasting has SAP and monaural
audio...
SAP / MONO
When the broadcasting is having only monaural
audio...
MONO
(cannot be switched.)
SAP /
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
DTV
1
Switch the audio language.
• When you press [AUDIO], the currently selected
language and the number of received languages
will be displayed on the screen.
• Every time you press [AUDIO], the language
will be switched.
English 1/3
English 1/3
Other 3/3
"Other" is indicated
when the language is not English,
Spanish or French.
* For international stations audio
language will still be displayed as
English.
• Languages you can switch differ depending
on the receiving broadcast.
• The information display will automatically dis-
appear in one minute.
NOTE:
The [AUDIO] feature does not affect external source sound.
SAP / STEREO
SAP / MONO
6
STEREO
6-1
Spanish 2/3
EN
19