Elvox 7200 Serie Instrucciones De Funcionamiento página 8

Automatic answer function
This function, which is only available in HANDS FREE mode,
activates the monitor audio connection automatically when a call
is received from the speech unit or intercom device, without the
need to push the TALK/LISTEN button
ve" condition is indicated by the illumination of the red LED
at the bottom left corner of the monitor, which is normally used to
indicate RINGTONE MUTE. The audio is activated automatical-
ly 5 seconds after the call is received. To enable this function,
with the monitor switched OFF press push-button
2 seconds to enter SETTING mode; simultaneously press and
hold down push-buttons
LED underneath starts flashing. At this point, while the LED is fla-
shing, press the TALK/LISTEN push-button
the change.
The function is confirmed if the red LED switches off. To disable
this function, follow the same procedure. If HANDS FREE mode
was not active during the enabling process, it will be activated
automatically when the AUTOMATIC ANSWER function is ena-
bled. If the automatic answer function is subsequently disabled,
the HANDS FREE function will remain active.
E N G L I S H
. The "audio acti-
and until the red
to confirm
Adjusting the conversation volume
The term "conversation volume" refers to the perceived volume
of the caller's voice when he/she is standing in front of the spe-
ech unit (entrance panel), or speaking through an intercommuni-
cating interphone or monitor. To adjust the conversation volume,
the user must be in communication with a speech unit or inter-
com device. Press push-button
SETTING mode; once the green LED
press and hold the TALK/LISTEN push-button
for
adjust the volume with push-buttons
This procedure applies both in HANDS FREE mode and in
PUSH-TO-TALK mode.
for 2 seconds to enter
starts flashing,
and
and .