Anti-Freeze Protection; Operation With A Sunis Rts Sensor - SOMFY HOME MOTION Oximo 50 S auto RTS Manual Del Usuario

Installation guide
8.1.2 Using the favourite position
Briefly press the STOP/my button:
-
The roller shutter starts to move and stops in
the favourite position (my).
8.1.3 Using the STOP function
The roller shutter is moving
Press the STOP/my button:
-
The roller shutter stops automatically.
8.1.4 Obstacle detection
The automatic obstacle detection function protects
the roller shutter and enables obstacles to be
cleared:
If the roller shutter detects an obstacle when it is
-
being lowered:
Either the roller shutter stops automatically.
Or it stops and is automatically raised.
If the roller shutter detects an obstacle when it is
-
being raised:
The roller shutter stops automatically.

8.1.5 Anti-freeze protection

The anti-freeze protection function operates in the
same way as the obstacle detection function:
If the Oximo 50 S auto motor detects any resis-
-
tance, it does not move in order to protect the
roller shutter:
The roller shutter remains in the initial position.

8.2 Operation with a Sunis RTS sensor

If the Oximo 50 S auto RTS motor is linked to a Sunis RTS sensor, with the Sun func-
tion activated and the favourite position activated, then the roller shutter will move
in accordance with the information sent by the Sunis RTS sensor, except if the roller
shutter is in the lower end limit position. In this case, the roller shutter will not move
and will remain in the lower end limit position.
8.2.1 Sun appearing
When the sunlight reaches the set threshold limit
-
on the Sunis RTS sensor and lasts for at least two
minutes, the roller shutter moves to the pre-set
favourite position (my) (except if the roller shutter
is in the lower end limit position).
Caution: if the roller shutter is in the lower end limit
position, it will not move even if the sunlight thres-
hold has been reached.
Copyright © 2008 Somfy SAS. All rights reserved.
Oximo 50 S auto RTS
my
my
my
59