Kit Contents; Installation; Fitting The Oximo Rts Module - SOMFY HOME MOTION Oximo 50 S auto RTS Manual Del Usuario

Installation guide
2.3.2 Locks and rigid links
After having affixed the roller shutter to the roller
-
tube, check that when the roller shutter is in
the lower end limit position, the rigid link/bolt is
correctly positioned and that the first slat is verti-
cally between the runners (as per F). If neces-
sary, adjust the number of slates used to improve
the position of the bolt/rigid link when the roller
shutter is in the lower end limit position.
Always refer to the manufacturer's size and
-
weight charts and fitting recommendations for
the rigid links or locks to select those suited to
the roller shutter used.
Caution: Use at least 2 bolts or 2 rigid links to attach
the roller shutter to the roller tube.

3. Kit contents

The Oximo 50 S auto RTS motor comprises two
inseparable components:
the s tubular module (D).
-
the Oximo RTS module (E),
-

4. Installation

It is essential to follow the order of assembly given
in the guide.

4.1 Fitting the Oximo RTS module

Caution! the adhesive supplied is only to be used for
this operation. Always use the adhesive provided by
Somfy. The use of any other adhesive is forbidden.
Caution: If the roller shutter is not fitted with a
flange, it is necessary to use some means of atta-
chment, such as a rilsan collar, along with some
adhesive. The additional means of attachment
chosen must hold the Oximo RTS module inside
the end piece regardless of the conditions of use of
the roller shutter.
Clean the inner face of the head rail end
1)
piece (F).
Remove the protector from the adhesive atta-
2)
ched to the Oximo RTS module (E).
Affix the Oximo RTS module (E) to the head rail
3)
end piece (F).
Recommended: Pass the power supply cable
through a cable grommet fixed in the headrail to
ensure the cable is not under strain.
Copyright © 2008 Somfy SAS. All rights reserved.
Oximo 50 S auto RTS
F
F
D
E
1 2
F
3
E
F
E
53