Publicidad
Idiomas disponibles
Idiomas disponibles
Position "Joe".
Top Strap Hooks:
Place where directed
by the Fit Sheet Notes.
Adjust top straps by pulling on the ends,
or loosen by pressing the metal buckles.
1033600C – 3/21
Do not install hooks
to plastic or glass!
Refer to the notes for your vehicle to
see if you should use the Glass Hatch
Adapter in place of the top or bottom
hooks.
If your vehicle requires the Glass Hatch
Adapter follow the Glass Hatch Adapter
instructions on the following page.
The load arms
should be tilted
up slightly.
Support Frame: Positioning
is critical to the load!
Read and follow the notes for your
vehicle. Place only on surfaces
which can support the load.
never place straps near vehicle's hot exhaust .
Lower Strap Hooks:
Place where directed
by the Fit Sheet Notes.
Publicidad
