Yakima MegaJoe Elite Manual De Instrucciones página 4

remove The carrier
A
from The car.
Pull straps
completely
out of the
buckles.
CLoSE THE
D
HATCH.
Pull firmly on
the straps to
seat the pads.
REmovE THE CARRIER FRom THE CAR.
A
Pull straps completely out of the hub.
D
BEFoRE CLoSINg
THE TRUNk:
Be sure the pads are
free from contact
between trunk door and
vehicle's frame.
1033600C – 4/21
No glass or plastic? You won't need the glass Hatch Hooks, continue to STEP 7.
REPLACINg UPPER STRAP HookS
B
Open the hatch
door. Pass the
strap ends through
the hatch opening
from inside the
vehicle.
E
While supporting
the carrier with your
body, attach the
adapter straps to your
carrier's top straps.
REPLACINg LowER STRAP HookS
• Close the trunk.
• Pull firmly on
the straps to seat
the pads.
C
Keep the pads away
from the door's edge.
B
oPEN THE
TRUNk
DooR.
E
Insert the new straps
from inside the hubs.
Thread new strap-end
back into buckle.
Before closing the
hatch pads must be
free from contact
between hatch door
and vehicle's frame.
Thread new sTrap-end
F
back inTo buckle.
Adjust upper straps by pulling on the ends.
Now that you have installed the glass
Hatch Adapter continue to STEP 7.
C
Position the pads
inside the trunk
with the straps
hanging free.
OK
F
Now that you
have installed
the glass Hatch
Adapter continue
to STEP 7.