FAAC TM ER Serie Guia De Inicio Rapido página 10

4 SETTING THE TRAVEL LIMIT FOR STANDARD OR DROP DOWN SUN BLINDS (not ERO)
It is possible to reverse the time order of the travel limit setting sequence, starting from step 2 and
then performing step 1.
Press the button that controls ascent (
release the push-button.
Press the stop/preferred position push-button TWICE for 2 seconds, release
it for 1 second, and keep pressed again until the motor performs two brief

movements in both directions.
Press the button that controls descent (
and release the push-button. Press the stop/preferred position push-button
until the motor moves briefly in both directions.

5
It is possible to reverse the time order of the travel limit setting sequence, starting from step 2 and
then performing step 1.
Press the button that controls ascent (
release the push-button.
Press the stop/preferred position push-button THREE TIMES for 2 seconds,
release it for 1 second, and keep pressed again until the motor performs
three brief movements in both directions.

Press the button that controls descent (
and release the push-button.
Press the stop/preferred position push-button until the motor moves briefly
in both directions.

STEPS TO PERFORM
TRAVEL LIMIT UP
every
TRAVEL LIMIT DOWN
SETTING THE TRAVEL LIMIT FOR BOX AWNINGS (not ERO)
STEPS TO PERFORM
TRAVEL LIMIT UP
X 3
every 2 SECONDS
TRAVEL LIMIT DOWN
or ) , go to travel limit up and
+
X 2
CONFIRM
2 SECONDS
5 SECONDS
or ) , go to travel limit down
CONFIRM
or ) , go to travel limit up and
+
CONFIRM
5 SECONDS
or ) , go to travel limit down
5 SECONDS
CONFIRM

MOTOR RESPONSE
X 2
X 1
5 SECONDS
MOTOR RESPONSE
X 3
X 1