Care And Cleaning; Troubleshooting - Envirolite EV1240L3-325 Manual Del Usuario

Operation

Plug the power cord of the fixture into a 120V outlet.

Care and Cleaning

NOTE: Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only
a dry soft cloth to duct or wipe carefully.
EXTERIOR MAINTENANCE

Use a dry or slightly dampened clean cloth and wipe the surface of the fixture
INTERIOR MAINTENANCE

Disconnect power to the fixture by turning off the circuit breaker or by removing the
fuse at the fuse box.

Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.

Troubleshooting

Problem
The light will not turn on.
The fuse blows or circuit breaker
trips when light is turned on.
Solution
 Make sure the power supply is on.
 Test or replace the switch.
 Check the wiring.
 Check the wire connections.
6