Safety Information; Planning The Installation; Tools Required - Envirolite EV1240L3-325 Manual Del Usuario

Safety Information

WARNING: Disconnect the power prior to removing or installing a light fixture.

Before starting installation of this fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box.

Consult a qualified electrician if you have any electrical questions or need to replace
the driver.

If you have any non-electrical questions about this fixture, please contact our
Customer Service Team at 1-855-573-6156.

Planning the Installation

NOTE: Keep your receipt and these instructions for Proof of Purchase.

Read all instructions before assembly and installation.

Before starting installation of the fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box.

To avoid damaging this product, assemble it on a soft, non-abrasive surface such as
carpet or cardboard.

Tools Required

Phillips
Screwdriver
Ladder
Flathead
Screwdriver
Drill Hammer
Wire Wire
Cutter Stripper
2
Pencil
Electrical
Tape
1/4" Drill
Bit
Safety
Goggles