Technical Specifications Of The; Eights - BATEC MINI 2 Manual De Usuario

IMPORTANT!
• Drive gently at moderate speeds.
• Avoid exposure to high temperatures.
• Avoid exposure to lo temperatures (belo 0 C).
• Avoid leaving the battery unused for long periods of time.
The battery on t just die suddenly; it gradually begins to perform
more poorly. If your battery suddenly stops or ing, it is normally due
to a technical problem and not the end of its lifespan.
Disposing of the battery
As ith all batteries, the BATEC MOBILITY batteries
must be disposed of properly. Chec
aste management centre. Contact BATEC MOBILITY if
you have any doubts.
Battery indicator operation
The battery status indicator is on the display (LCD panel) of the BATEC
ELECTRIC HANDBIKE. The indicator is made up of several bars that
indicate the % of energy available. (
IMPORTANT!
hen the system detects that there is less than 20
available, it can limit the HANDBIKE BATEC ELECTRIC to position 1
(maximum speed: 6 m/h or m/h, depending on the model) to save
power.
– 36 –
ith your local
ee fig. 59)
battery charge
4.9.4. TECHNICAL SPECIFICATIONS OF THE 280 WH BATTERY
• Dimensions: 0 x 1 0 x 60 mm
• eight: 2.6 g
• Po er: 2 0 h
• Voltage: 36 V
• Maximum discharge current: 2 A
• Maximum charge current: A
• Internal resistance: 200 mOhm
• BMS consumption: 0.2 mA hen on;
• Battery range by model:
– HANDBIKE BATEC ELECTRIC MINI 2 / ELECTRIC 2 / RAPID 2 / SCRAM-
BLER 2: 22 m
4.9.5. TECHNICAL SPECIFICATIONS OF THE 522 WH BATTERY
• Dimensions: 0 x 1 0 x 60 mm
• eight: g
• Po er: 22 h
• Voltage: 36 V
• Maximum discharge current: 2 A
• Maximum charge current: A
• Internal resistance: 200 mOhm
• BMS consumption: 0.2 mA hen on;
• Battery range by model:
– HANDBIKE BATEC ELECTRIC MINI 2 / ELECTRIC 2: 0 m
– 37 –
0.02 mA hen o
0.02 mA hen o