Product Use - Nuna norr Manual Del Usario

Ocultar thumbs Ver también para norr:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 56

Product Use

DO NOT install this enhanced child restraint on
vehicle seats that face sideways (1) or rearward (1)
with respect to the moving direction of the vehicle.
DO NOT place rear-facing enhanced child restraint
on front seat with air bag. Death or serious injury may
occur. (1) Please reference vehicle owner's manual for
more information.
It is recommended to install this enhanced child
restraint on the rear vehicle seat. (1)
This enhanced child restraint is suitable for vehicle
seats with i-Size ISOFIX anchor points. (2)
DO NOT install this enhanced child restraint on
vehicle seats unstable during installation.
Installation
1
- Unfold the load leg from the storage
compartment. (3)
2
- Fit the ISOFIX guides into the ISOFIX anchor
points. (4) The ISOFIX guides can protect the
surface of the vehicle seat from being torn. They
will also guide the ISOFIX connectors.
3
- Press the ISOFIX release button on either side of
the base, then pull out the ISOFIX connectors. (5)
4
- Line up the ISOFIX connectors with the ISOFIX
guides, and then click both ISOFIX connectors
into the ISOFIX anchor points. (6)
13
NORR instructions
Make sure that both ISOFIX connectors are securely
attached to their ISOFIX anchor points. There should be
two audible clicks and the colors of the indicators on the
both ISOFIX connectors should be completely green.
(6)-1
Check to make sure the enhanced child restraint
is securely installed by pulling on the both ISOFIX
connectors.
5
- There are 9 adjustable positions for ISOFIX. Press
the ISOFIX release button and push the base back
against the vehicle seat until tight.
6
- After placing the enhanced child restraint on the
vehicle seat, extend the load leg to floor. (7), The
load leg indicator will show green when installed
correctly, red means it is installed incorrectly. (7)
The load leg has 24 positions. When the load leg
indicator shows red this means the load leg is in the
wrong position.
Make sure the load leg is secure by pressing
down on the front of the enhanced child restraint.
To shorten the load leg, squeeze the load leg
release button and pull the load leg upwards.
7
- To remove the enhanced child restraint, press
the ISOFIX release button (5)-1 and pull the
base away from the seat, then while squeezing
the button and secondary lock on the ISOFIX
connectors remove from the vehicle. (8)
14
NORR instructions

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Norr

Tabla de contenido