3
- Fix the buckles on the both sides of seat to make
placing the baby more convenient. (20)
4
- Use Infant Insert.
Infant insert is for children's protection. (21)
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend
using the full infant
insert while the baby
is under 60 cm or
until they outgrow
the insert. The infant
Remove wedge by
insert increases side
detaching the snaps
impact protection.
to allow more space
when the infant does
not fit comfortably.
5
- Place the child into the enhanced child restraint
and lock the buckle. Please refer to. (22)
6
- Tighten the shoulder harness straps by pulling the
adjustment webbing. (23)
Make sure the space between the child and the
Shoulder Harness Straps is about the thickness of
one hand.
17
NORR instructions
Remove the head
support portion of
the infant insert
when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the
infant's shoulders no
longer fit comfortably.
1
The wedge can
be used separately
without being
attached to the
insert to bolster
2
the infant's back
for more comfort.
Detach Soft Goods
1
- Open the buckle, then remove the infant insert.
2
- Open the snaps. (24)
3
- Push the crotch strap through the crotch strap
opening. (25)
4
- Detach the snaps on the main seat pad behind
shoulder harnesses. (26) Place the shoulder
harnesses behind the flap below the headrest.
(27)
5
- Detach the hook and loop fasteners to remove the
shoulder belt cover. (28)
6
- Unfasten the elastic on the bottom of headrest to
remove the head support soft goods. (29)
7
- Remove the soft goods. (30)
To assemble winter and summer soft goods
according to reversed steps above.
Please keep the instruction manual in the storage
compartment at the bottom of the enhanced child
restraint (31).
18
NORR instructions