Storage Pouch Installation; Adjustment; Handle Height Adjustment; Handgrip / Hand Brake Position Adjustment - Graham Field LUMEX LX9000 Gaitster Manual Usuario

STORAGE POUCH INSTALLATION

1. Install the storage pouch on the frame's
wire hangers, shown at near right just
below front of seat.
2. Secure hook and loop straps around both
legs, as shown at middle right.
3. Secure hook and loop straps around
front of frame just behind front wheel, as
shown at upper far right, where hook and
loop straps are shown fastened over front
brake cable clip.
The storage pouch, shown correctly installed at right, can be
conveniently removed to place items and then reattached, no
tools needed.
WARNING: Ensure the storage pouch is securely installed
before use.

ADJUSTMENT

HANDLE HEIGHT ADJUSTMENT

Info: Consult your healthcare professional, distributor
or caregiver to assist you in finding the best handle
height for you.
1. Turn both locking knobs, shown at right,
counterclockwise to release handles inside frame.
2. Move handles to desired height — note numbers on
handle shafts shown at right to match handle height.
Ensure both handles are adjusted to the same
height.
3. Turn locking knobs clockwise to lock handles in place
inside frame.
WARNING: Ensure locking knobs are securely tightened before use.

HANDGRIP / HAND BRAKE POSITION ADJUSTMENT

Info: The handgrips can be adjusted to an angle and depth
most comfortable for the user.
Refer to picture at right.
1. Loosen both locking handles.
2. Move handgrip / handbrake assembly tubing to desired
angle and depth.
Ensure both handgrips are adjusted to the same depth.
3. Tighten both locking handles to lock handgrip / handbrake
assemblies in place.
WARNING: Ensure locking handles are securely
tightened before use.
LX_LX9000-INS-LAB-RevC21 7