Electrical Connection - B.A. International ULTIseal BASE740 Manual Del Usuario

WARNING
- The machine conforms to the safety regulations established by the Standards Institute and has a two
prong plug (EU) or three prong plug (UK) which ensures that the apparatus is shock resistant.
- The device has a double isolation. Only the resistance is connected to earth because the rest of the
appliance is in double insulation.
- The most fundamental safety requirements are: a sturdy base and an electrical voltage capacity
which is written on the label. In case of doubt have it verified by qualified personnel.
SHOULD THE REQUIREMENTS LISTED NOT BE OBSERVED, B.A. INTERNATIONAL LTD.
FORFEITS ALL RESPONSIBILITY FOR THE MISUSE OF THE MACHINE.
Check that the electrical current indicated on the label on the rear of the machine corresponds to the voltage
of the place of installation.
The machine must be connected to an electrical system with adequate voltage which corresponds to all
standards laws of the country of installation.
ATTENTION: Don't fold the electrical cable and don't lean objects on it.

3.2 - ELECTRICAL CONNECTION

8
ULTIseal BASE740_EN Rev 2021/01