Chapter 6; Cleaning Instructions; Special Maintenance And Warnings - B.A. International ULTIseal BASE740 Manual Del Usuario

Before performing any maintenance operations, carefully read the following safety
instructions and, especially, chapter 3 "Safety".
DANGER: HIGH INTERNAL VOLTAGE.
WARNING: DISCONNECT THE POWER SUPPLY BEFORE STARTING CLEANING.
Non-observance may cause serious injury to people and seriously damage the unit.
ALL MAINTENANCE OPERATIONS MAY ONLY BE PERFORMED BY THE RESPONSIBLE AUTHORITY OR
BY THE TECHNICIANS AUTHORISED BY THE ASSISTANCE SERVICE OF B.A. INTERNATIONAL LTD.
- Clean the exterior of the machine with a damp cloth, after making certain that the machine is completely
dry. Before starting to work make sure that the machine is completely dry.
During the cleaning of the machine pay attention to the cutting edge position.
Before starting work, make sure the unit is dry. Beware of the knife blade when
cleaning the unit.

6.1.1 - Special maintenance and warnings

- The machine does not require routine servicing.
-
- All repair work must be carried out by an approved service centre.

CHAPTER 6

6.1 - CLEANING INSTRUCTIONS

12
ULTIseal BASE740_EN Rev 2021/01