Krieger HC10 Manual Del Usuario página 7

For each time zone the starting time and temperature are determined. Start times and
temperatures are set at the factory, but can be changed as required. The factory setting is
shown in Table 1.
The eight times zones in all are called program 1, 2 etc. up to program 8.
Table 1: Factory setting for night and day setback
WORKDAYs
Program-Time zone
1
2
3
4
WEEKEND days
Program-Time zone
5
6
7
8
Times and temperatures can be changed as required. See section, Altering factory-set
times and temperatures.
4.1) Changing time settings for night and day setback
‹ Press [P] followed by [Ç] or [Å] to the program you wish to change; the display will
flash
‹ Press [π]
‡ The hours on the time display will flash
‹ Use [Ç] or [Å] to set the hour figure
‹ Press [π]
‡ The minutes on the time display will flash
‹ Use [Ç] or [Å] to set the minute figure
‹ Press [OK]
‡ The selected PROGRAM will flash
‹ Use [Ç] or [Å] to select the program you wish to change next
or
‹ Exit by pressing [OK] for 2 seconds
4.2) Changing temperature settings for night and day setback
‹ Press [P]
‡ PROGRAM will flash
‹ Press [Ç] or [Å] to the program you wish to change; the display will flash.
‹ Press [·]
‡ The temperature will flash
‹ Use [Ç] or [Å] to set the temperature
‹ Press [OK]
‡ The selected PROGRAM will flash
‹ Use [Ç] or [Å] to select the program you wish to change next
or
‹ Exit by pressing [OK] for 2 seconds
4.3) Deactivating or activating program/time zone in night and day setback
Programs/time zones in the night and day setback program can be deactivated or
activated as required.
Time
05:00 – 08:30
08:30 – 15:00
15:00 – 22:00
22:00 – 05:00
Time
07:00 – 09:00
09:00 – 14:00
14:00 – 23:00
23:00 – 07:00
Temperature
22°C
18°C
22°C
18°C
Temperature
22°C
20°C
22°C
18°C
7