Operating Instructions; Technical Characteristics - Rapid EG320 Manual De Instrucciones

ELECTRIC HOT MELT APPLICATOR: EG320
Operating instructions

Technical Characteristics

Dimensions (HxLxW) 20,5 x 24 x 4,5 cm
Weight : 0,47 kg
Working voltage : 220V-240V~, 50Hz
Power rating : 120W at start-up, 15W in use
Temperature : Self-regulated
Glue sticks: Rapid Ø 12mm
Safety Instructions
Read safety rules and
instructions carefully
before using this
machine.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory and mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
• Do not use or store this machine
in a humid environment. Do
not place it where it may be
splashed by water. Do not
expose it to extreme changes in
temperature during or directly
after use.
• Only use it indoors on a clean, dry
work surface. Excessive dust and
dirt may reduce lifetime of this tool.
• Never unplug the machine by
pulling the cable.
• If the power cable is damaged
4
or cut, remove the plug from the
electric socket immediately and
do not use the machine. It must
be replaced by the manufacturer
or its service agent or a similar
qualified person in order to avoid
a hazard.
• Unplug the machine when not
in use, before any servicing
operations (maintenance,
cleaning etc.)
• Always verify that the appliance
is attached to a ground socket.
• When using an electric
extension cable, check that it is
in good working order and that it
has a ground socket.
• Never use the tool if it is
damaged in any way.
• Never insert objects other than
Ø12mm Rapid glue sticks into
the machine.
• Never remove a glue stick that
has already been inserted.
• It is normal for this tool to
become quite warm during use.
This is normal and does not
indicate a problem.
• Hot Surfaces: the nozzle of
the appliance and the glue can
reach a temperature of approx.
200°C. Do not touch the heated
nozzle or the hot adhesive. Avoid
any contact with the skin. If you
burn yourself, put the burn in
cold water immediately. Never
try to remove a large quantity of
glue without medical help.
• Keep children away. Children
should not use this glue gun.