Publicidad
Enlaces rápidos
EBDHS-B01-DD
DALI digital dimming, high bay/high level, dedicated window for light sensor & IR communications,
presence PIR detector, specifically for integration with an enclosure or a luminaire
Digitales DALI-Dimmen, Hochregal / Hochpegel, spezielles Fenster für Lichtsensor- und
IR-Kommunikation, Präsenz-PIR-Detektor, speziell für die Integration in ein Gehäuse oder eine Leuchte
Regulación digital DALI, bahía alta / nivel alto, ventana dedicada para sensor de luz y comunicaciones
IR, detector PIR de presencia, específicamente para integración con una carcasa o una luminaria
Dimerização digital DALI, alto nível / alto nível, janela dedicada para sensor de luz e comunicações IR,
detector PIR de presença, especificamente para integração com um gabinete ou luminária
Gradation numérique DALI, baie haute / haut niveau, fenêtre dédiée pour capteur de lumière et
communications IR, détecteur PIR de présence, spécifiquement pour l'intégration avec un boîtier ou
un luminaire
Dimmer digitale DALI, high bay / high level, finestra dedicata per sensore di luce e comunicazioni IR,
rilevatore PIR di presenza, specifico per l'integrazione con una custodia o un apparecchio di illuminazione
DALI digitaal dimmen, hoogbouw / hoog niveau, speciaal venster voor lichtsensor en IR-communicatie,
PIR-aanwezigheidsdetector, specifiek voor integratie met een behuizing of een armatuur
Downloads and Videos | Downloads und Videos | Descargas y Videos | Descargas e Videos |
Téléchargements & Vidéos | Downloads e Video | Downloads en Video's
WDA012 Issue 2 Installation Guide
High Bay Sensor (for Integration)
Warning | Warnung | Advertencia |
Aviso | Attention | Attenzione | Waarschuwing
EN
This device should be
installed by a qualified electrician in
accordance with the latest edition
of the IEE wiring regulations.
The detector is specifically
designed for integration with an
enclosure or a luminaire only
DE
Dieses Gerät ist
ausschließlich von qualifizierten
Elektrofachkräften zu installieren.
ES
Sólo un electricista
cualificado debe instalar este
dispositivo.
cpelectronics.co.uk/cp/A012
EBDHS-B01-DD
PT
Somente um eletricista
qualificado deve instalar este
dispositivo.
FR
Seul un électricien
qualifié peut installer ce dispositif.
IT
Il dispositivo deve essere
installato da un elettricista
qualificato.
NL
Dit apparaat moet
worden geïnstalleerd door een
gekwalificeerde elektricien.
Publicidad
Manuales relacionados para CP Electronics EBDHS-B01-DD
Resumen de contenidos para CP Electronics EBDHS-B01-DD
- Página 1 WDA012 Issue 2 Installation Guide EBDHS-B01-DD High Bay Sensor (for Integration) EBDHS-B01-DD DALI digital dimming, high bay/high level, dedicated window for light sensor & IR communications, presence PIR detector, specifically for integration with an enclosure or a luminaire Digitales DALI-Dimmen, Hochregal / Hochpegel, spezielles Fenster für Lichtsensor- und IR-Kommunikation, Präsenz-PIR-Detektor, speziell für die Integration in ein Gehäuse oder eine Leuchte...
- Página 2 Dimensions (mm) | Abmessungen (mm) | Dimensiones (mm) | Dimensões (mm) | Dimensioni (mm) | Dimensies (mm) 64mm cut out 64mm ausgeschnitten Recorte de 64 mm 64mm recortado Découpe de 64 mm Taglio da 64 mm 64 mm uitgesneden Detection pattern | Erfassungsbereich | Patrón de detección | Padrão de detecção | Performance de détection | Modello di rilevazione | Detectie zone high sensitivity...
- Página 3 Wiring | Verkabelung | Cableado | Ligações | Câblage | Cablaggio | Bedrading Dimming ouputs | Ausgänge dimmen | Salidas de atenuación | Saída de dimerização | Gradation des sorties | Uscite di dimmerazione | Uitgangen dimmen Basic insulation only. Although low voltage, Isolamento básico apenas.
- Página 4 Installation | Instalación | instalação | Installazione | Installatie This device is designed to be flush mount for integration with an Cet appareil est conçu pour être encastré pour une intégration avec enclosure or a luminaire. un coffret ou un luminaire. •...
- Página 5 Wire in plugs & connect to detector | Verdrahtugn & Anschluß des Melders | Cableado y conexión del sensor | Cablagem e ligação do sensor | Câbler le bornier et connecter au détecteur | Cablaggio e connessione al rilevatore | Bedrading & aansluiten op detector Wire in plug/s, using wiring diagram on page 3 as Raccorder les câbles au bornier débrochable en a guide.
-
Página 6: Programming Menu
Outros parâmetros encontrados no aparelho NÃO devem ser usados. Se eles forem alterados inadvertidamente, aplique a função “Reinicialização de fábrica” antes de iniciar o processo de comissionamento. UNLCDHS Programming – Detector Parameters Basic Parameters for EBDHS-B01-DD Parameter Default Range / Option... - Página 7 UNLCDHS Programming – LUX Control Basic Parameters for EBDHS-B01-DD Parameter Default Range / Option Description Light Level (MI) 1 – 950 Sets a target light level to be maintained by the lighting system. (999 = maintained Limit the target LUX setting to within 950 LUX which when mounted on the...
- Página 8 UNLCDHS Programming – Output Ch. 2 Advance Parameters available for EBDHS-B01-DD Parameter Default Range / Option Description On Value 0 – 99 Dimmed output level when lights manually switched on or via detection of occupancy. Off Value 0 – 99 Dimmed output level when lights manually switched off or after detector times out.
- Página 9 UNLCDHS Programming – User Basic Parameters for EBDHS-B01-DD Parameter Default Range / Option Description Select Scene 1 – 8 The preset dimming levels are as follows (does not operate the relay outputs): Scene 1 – Maintained illuminance, Scene 2 – 100%, Scene 3 – 75%, Scene 4 – 50%, Scene 5 – 25%, Scene 6 –...
- Página 10 Testing | Prüfen | Pruebas | Teste | Test | Verifiche | Testen | Тестирование 1. Power up the sensor. The load should 1. Alimenter le capteur : la charge devrait Presence Detection come on immediately. s’allumer immédiatement. 2. Vacate the room or remain very still and wait 2.
- Página 12 Brent Crescent, London NW10 7XR t. +44 (0)333 900 0671 enquiry@cpelectronics.co.uk www.cpelectronics.co.uk connect with us Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice. WDA012 Issue 2 Installation Guide EBDHS-B01-DD...