Publicidad
Idiomas disponibles
Idiomas disponibles
P1S Declaration of Conformity
P1S Declaration of Conformity
P1S Declaration of Conformity
According to ATEX 94/9/EC
According to ATEX 94/9/EC
According to ATEX 94/9/EC
P1S Declaration of Incorporation
P1S Declaration of Incorporation
P1S Declaration of Incorporation
P1S Declaration of Conformity
According to EC Machinery Directive 2006/42/EC
According to EC Machinery Directive 2006/42/EC
According to EC Machinery Directive 2006/42/EC
According to ATEX 94/9/EC
P1S Declaration of Incorporation
We
According to EC Machinery Directive 2006/42/EC
Parker Hannifin Manufacturing
We
Parker Hannifin Manufacturing
We
Parker Hannifin Manufacturing
Germany GmbH & Co. KG
Germany GmbH & Co. KG
Germany GmbH & Co. KG
Pneumatic Division Europe
Pneumatic Division Europe
Pneumatic Division Europe
Industriestrasse 8
Industriestrasse 8
We
Parker Hannifin Manufacturing
Industriestrasse 8
70794 Filderstadt Germany
70794 Filderstadt Germany
Germany GmbH & Co. KG
70794 Filderstadt Germany
Pneumatic Division Europe
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
Industriestrasse 8
use in potentially explosive atmospheres). ISO6431 Cylinders P1S Series are compatible for the use in explosive
use in potentially explosive atmospheres). ISO6431 Cylinders P1S Series are compatible for the use in explosive
use in potentially explosive atmospheres). ISO6431 Cylinders P1S Series are compatible for the use in explosive
70794 Filderstadt Germany
atmosphere Ex II 2 GD c T4 (T120°C).
atmosphere Ex II 2 GD c T4 (T120°C).
atmosphere Ex II 2 GD c T4 (T120°C).
Declare that the following pneumatic cylinders have been assessed in accordance with ATEX 94/9/EC (Products for
P1S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
P1S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
use in potentially explosive atmospheres). ISO6431 Cylinders P1S Series are compatible for the use in explosive
P1S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
and manufactured in compliance with following elements:
and manufactured in compliance with following elements:
atmosphere Ex II 2 GD c T4 (T120°C).
and manufactured in compliance with following elements:
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
P1S is designed for utilization in applications falling under the scope of the ATEX 94/9/EC. This product is designed
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
methodology
methodology
and manufactured in compliance with following elements:
methodology
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
and requirements
and requirements
EN 1127-1:2007 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and
and requirements
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
methodology
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
by constructional safety ´c´
by constructional safety ´c´
EN 13463-1:2009 Non electrical equipment for use in potentially explosive atmospheres – Part 1: Basic method
by constructional safety ´c´
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
and requirements
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
Pneumatics
Pneumatics
EN 13463-5 Non-electrical equipment intended for use in potentially explosive atmospheres – Part 5: Protection
Pneumatics
As manufacturer of the partly completed machine we declare that:
As manufacturer of the partly completed machine we declare that:
by constructional safety ´c´
As manufacturer of the partly completed machine we declare that:
EN 983+A1:2008 Safety of machinery – Safety requirements for fluid power systems and their components -
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
Pneumatics
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
2006/42/EC
2006/42/EC
As manufacturer of the partly completed machine we declare that:
2006/42/EC
The relevant technical documentation is complied in accordance with part B of Annex VII
The relevant technical documentation is complied in accordance with part B of Annex VII
The relevant technical documentation is complied in accordance with part B of Annex VII
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
The specified cylinders correspond to the listed essential requirements of the EC Machinery Directive
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
a reasonable request by the national authorities
a reasonable request by the national authorities
2006/42/EC
a reasonable request by the national authorities
The relevant technical documentation is complied in accordance with part B of Annex VII
Product: Pneumatic Air motor P1S Series
Product: Pneumatic Air motor P1S Series
Product: Pneumatic Air motor P1S Series
The relevant technical documentation in accordance with part B of Annex VII will be transmitted in response to
Directives
Directives
Directives
a reasonable request by the national authorities
2006/42/EC
2006/42/EC
Product: Pneumatic Air motor P1S Series
2006/42/EC
Directives
Standards
Standards
Standards
DIN EN ISO 12100
DIN EN ISO 12100
DIN EN ISO 12100
2006/42/EC
This partly completed machinery must not be put into service until the final machinery into which it is to be
This partly completed machinery must not be put into service until the final machinery into which it is to be
Standards
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
DIN EN ISO 12100
This partly completed machinery must not be put into service until the final machinery into which it is to be
incorporates has been declared in conformity with the provisions of the Directive 2006/42/EG, were appropriated.
All bore sizes from 32 to 125 mm
4601503-P1S Annexe
4601503-P1S Annexe
4601503-P1S Annexe
4601503-P1S Annexe
Date
Date
Date
2006-06
2006-06
2006-06
Date
Date
Date
Date
2011-03
2011-03
2011-03
2006-06
Date
2011-03
P1S-C***MS-****-EXNN
P1S-C***MS-****-EXNN
P1S-C***MS-****-EXNN
P1S-D***MS-****-EXNN
P1S-D***MS-****-EXNN
P1S-D***MS-****-EXNN
P1S-E***MS-****-EXNN
P1S-E***MS-****-EXNN
P1S-E***MS-****-EXNN
P1S-F***MS-****-EXNN
P1S-F***MS-****-EXNN
P1S-C***MS-****-EXNN
P1S-F***MS-****-EXNN
P1S-L***MS-****-EXNN
P1S-L***MS-****-EXNN
P1S-D***MS-****-EXNN
P1S-L***MS-****-EXNN
P1S-E***MS-****-EXNN
P1S-F***MS-****-EXNN
All bore sizes from 32 to 125 mm
All bore sizes from 32 to 125 mm
P1S-L***MS-****-EXNN
All strokes from 25 to 1000 mm
All strokes from 25 to 1000 mm
All strokes from 25 to 1000 mm
Filderstadt, Germany October 2014
Filderstadt, Germany October 2014
All bore sizes from 32 to 125 mm
Filderstadt, Germany October 2014
All strokes from 25 to 1000 mm
Filderstadt, Germany October 2014
Applied and fulfilled essential
Applied and fulfilled essential
Applied and fulfilled essential
requirements
requirements
requirements
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
Applied and fulfilled essential
Remark
Remark
requirements
Remark
Partly fulfilled
Partly fulfilled
Partly fulfilled
1.1.2, 1.1.5, 1.3.4, 1.5.3, 1.7.3, 1.7.4
Remark
Partly fulfilled
_________________________
_________________________
_________________________
Ing. Franck Roussillon
Ing. Franck Roussillon
Ing. Franck Roussillon
European Product Manager
European Product Manager
European Product Manager
Actuators Business Unit, Pneumatic Division Europe
Actuators Business Unit, Pneumatic Division Europe
_________________________
Actuators Business Unit, Pneumatic Division Europe
Ing. Franck Roussillon
European Product Manager
Actuators Business Unit, Pneumatic Division Europe
14
Additional Information
Additional Information
This coverage could only be referred to as
Additional Information
This coverage could only be referred to as
long as operations needed for final
This coverage could only be referred to as
long as operations needed for final
assembling and starting up of theses
long as operations needed for final
assembling and starting up of theses
products comply with standards relating to
assembling and starting up of theses
products comply with standards relating to
Additional Information
the above mentioned directive. Each time
products comply with standards relating to
the above mentioned directive. Each time
This coverage could only be referred to as
this will be required for compliance purpose,
the above mentioned directive. Each time
this will be required for compliance purpose,
long as operations needed for final
the user will have to apply for a complete
this will be required for compliance purpose,
the user will have to apply for a complete
assembling and starting up of theses
coverage of the final assembled system
the user will have to apply for a complete
coverage of the final assembled system
products comply with standards relating to
according to the above mentioned directive
coverage of the final assembled system
according to the above mentioned directive
the above mentioned directive. Each time
and relating standards
according to the above mentioned directive
and relating standards
this will be required for compliance purpose,
and relating standards
the user will have to apply for a complete
coverage of the final assembled system
according to the above mentioned directive
and relating standards
Publicidad
