Safety Information; Planning The Installation; Tools Required - Envirolite EV1014A-WH Manual De Instrucciones

SAFETY INFORMATION

 Before starting installation of this
fixture or removal of a previous
fixture, disconnect the power by
turning off the circuit breaker or by
removing the fuse at the fuse box.
 Consult a qualified electrician if you have any electrical questions or need to
replace the driver.
 If you have any non-electrical questions about this fixture, please contact our
Customer Service Team at 1-855-573-6156.

PLANNING THE INSTALLATION

Read all instructions before assembly and installation. Before starting installation
of the fixture or removal of a previous fixture, disconnect the power by turning off
the circuit breaker or by removing the fuse at the fuse box. To avoid damaging
this product, assemble it on a soft, non-abrasive surface such as carpet or
cardboard.

TOOLS REQUIRED

Phillips
Screwdriver
Ladder
WARNING: Disconnect the
power prior to removing or
installing a light fixture.
NOTE: Keep your receipt and
these instructions for Proof of
Purchase.
Wire
Cutter
Electrical
Tape
2
Wire
Stripper
Safety
Goggles