Technical Specifications - Orbis MIRUS TOUCH Manual Del Usuario

The programming is confirmed by pressing
the last press.
There is an option to copy one full of programming to another day. Select the
required day to copy and press the
move to the day to be modified and press the
the same programming as the previous one. Repeat this operation to copy various
days of the week.
KEYPAD BLOCKED
DAY OF THE WEEK
MANUAL OPERATION
CURRENT TIME
AMBIENT
TEMPERATURE
SCHEDULE -
PROGRAMMED
TEMPERATURE
INDICATION IN
TIME PERIODS
CONTROL TEMPERATURE
The factory preset temperatures are:
WINTER
Comfort : 20 ºC
Savings : 17 ºC

Anti-icing : 5 ºC
In order to modify the values of these temperatures, press the button
corresponding the temperature type that is to be configured (Comfort
Savings ) and use and to modify the value.
To see the temperature type and value, programmed into the current time press
either or buttons.
AUTOMATIC OPERATION (TIMED THERMOSTAT)
The timed thermostat will switch heating On or Off according to the current day
programming, displaying the corresponding schedule on the screen. If activated, it
will also display the symbol (heating mode) or
MANUAL OPERATION (THERMOSTAT)
If, when in automatic mode, the
mode and operate as a simple thermostat, without any time programming and only
taking the temperature into account. By selecting "modify temperature", it is only
necessary to press or until the desired temperature is set. The unit
commences thermostat operation five seconds after the last temperature
modification operation or pressing
temperature onscreen, together with the
To return to automatic mode, (timed thermostat) press
TEMPORARY MANUAL MODE
This mode can be used to manually modify the temperatures corresponding to
consecutive time periods with the same control temperature. When the programme
changes the temperature control type, it will return to the established programme.
In automatic mode, pressing or
current time period. Pressing
temperature values for the time periods that are consecutive, then passing to
temporary manual mode.
The control temperature symbols will disappear from the schematic during the time
in which TEMPORARY MANUAL is active and the word MANUAL will appear
flashing on the display.
To exit this mode before completion, press
OFF OPERATION. OFF (SWITCHED OFF)
When is pressed, if the unit is switched on it will pass the switched off mode
and will not switch on or permit temperature manipulation, the screen displays
In this mode, the unit measures the ambient temperature, but will not perform any
of its functions, except if the temperature drops below the anti-freezing level of 5
ºC, a situation in which the anti-icing programme will be activated in which the anti-
icing programme will be activated and in which case the unit is switched on to
prevent icing.
To exit this mode and switch the unit on the
RESET
RESET is used when the factory default adjustments are to be restored
(temperature values, programmes etc).
To perform this operation, press the following buttons together for five
seconds , and .
After a RESET, the unit will have to be reprogrammed again.
or automatically ten seconds after
button then use the and
button again, the day will take on
HEATING
COOLING
COMFORT
TEMPERATURE
SAVINGS
TEMPERATURE
LOW-BATTERY
INDICATOR
SUMMER
Comfort : 23 ºC
Savings : 28 ºC

Anti-icing : -
(air-conditioning mode).
button is pressed, the unit will enter manual
causing the unit to display the ambient
.symbol.
.
will display the control temperature for the
or again will manually modify the control
.
button must be pressed again .
ADVANCED PROGRAMMING
With the keypad active, press
adjustment is displayed, continue pressing until H-C appears on the left of the
screen and flashing "Set" on the right.
The parameters can be modified by pressing
buttons to
H-C ("FLA" heating operation in winter / "ICE" air-conditioning in summer), ANTI
(anti-icing temperature adjustable from 1ºC to 10ºC), DIF (adjustable differential
0.1ºC to 1ºC), ATC (automatic summer time change-over ON-OFF) and CONT
(screen contrast adjustment from 1 to 5, to improve screen visibility in function of
installation height). Use
or wait ten seconds and the settings will be automatically saved.
KEYBOARD LOCKING
In order to prevent undesired manipulation, the keyboard can be locked by
pressing
The same operation should be repeated to unlock the keyboard.
CLEANING THE DISPLAY
Clean with a clean damp cloth. Do not use detergents or abrasives.

TECHNICAL SPECIFICATIONS

Power supply:
Breaking power:
Contact:
Battery lifetime:
Temperature measurement precision
Temperature updating
Resolution
LCD measurement range:
Type of action:
Accepted programs:
Minimum programmable times:
Operation precision:
Output relay updating:
or
Control temperature regulation:
Regulation type:
Automatic summertime change-over:
Keypad block:
Display contrast adjustment:
Operating temperature:
Storage and transport temperature:
Protection class:
Protection type:
Contamination situation:
Transient pulse voltage:
Ball test temperature:
Connection
WARNING: When the expected loads exceed the maximum break current,
contactors must be employed.
DIMENSIONS (mm)
.
00/03.2014
for ten seconds, after five seconds the date
and to select the desired value and confirm with
for more than 10 seconds, this symbol
Two 1.5 V LR6/AA alkaline (not
included)
µ 10 (3) A 250 V~
AgNi 90/10 switched
Approximately one year
 0,5 C
Every 60 seconds.
0,1 C.
0 ºC to 50 ºC
1B, 1S, 1T and 1U
7 (one for each day of the week)
Periods of 30 minutes
 ±1,2 s /24 h at 23 ºC
Every 60 seconds
Savings
Comfort
Anti-icing
Manual
ON-OFF with adjustable hysteresis
0.1ºC to 1ºC (default 0.2ºC).
ON/OFF (default ON).
Activated/disabled
1 to 5 (default 5)
From 0 ºC to +50 ºC
From -10 ºC to +60 ºC
II under correct installation conditions
IP40 in accordance with EN 60529,
under correct installation conditions
Normal
2.5 kV
75 ºC (21.2.5); 105 ºC (21.2.6)
Screw terminals for 2.5mm² maximum
section wires.
138
Mirus touch
1
NO
T40
2
10(3) A
Com
250 VAC
3
NC
18 29
86
Latest edition available on the Website www.orbis.es
ORBIS TECNOLOGÍA ELÉCTRICA, S.A.
Lérida, 61
Teléfono:+ 34 91 5672277;
E-mail: info@ orbis.es
http://www.orbis.es
again:
is displayed onscreen.
: +5 ºC to +25 ºC
: +15 ºC to +35 ºC

: +1ºC to +10 ºC
: +5 ºC to +35 ºC
33.4
4
11
A016.32.56693
E–28020 MADRID
Fax:+34 91 5714006