Siemens SITRANS FUE1010 IP40 NEMA 1 Guía Rápida página 28

Commissioning
3.3 Sensor Installation
10.Take either sensor and apply a continuous lengthwise 1/8-inch bead of coupling compound
26
across the center of the sensor emitting surface.
①
F-Connector
②
Angled Edge
③
Sensor
Figure 3-5 Sensor
①
Front View
②
Spring Clip (Not present on some
models)
③
Sensor Clamping Screw
④
Spacer Bar
⑤
1012 Series Mounting Frame
Figure 3-6 Sensor Installation
④
Back End
⑤
Emitting Surface
⑥
Coupling Compound
⑥
Mounting Strap
⑦
Note: Operational 2nd Mounting Strap
shown. Larger pipes may need an additional
strap for a more secure mount.
⑧
Spacer Bar Platform and Clamping Screw
⑨
Spacer Bar Reference Hole
⑩
Orientation for Single Beam Sensor at 9
o'clock position
⑪
Orientation for Dual Beam Sensor at 10 & 2
o'clock positions
FUE1010 IP40 (NEMA 1) Energy Portable
Compact Operating Instructions, 5/2009, A5E02384186-03