1.3
how to operate the clamp
IPHNM10 lifting clamps are suitable for horizontal lifting and transport of steel plates,
EN
beams and structures that may not be damaged.
08
See illustrations 5 to 7 for part reference.
1.
Place the clamps on the plate and exercise pressure, so that the inner side of the
jaw rests against the plate (E) (5).
2.
Tension the cables or chains with the crane hook, while the inner side of the jaw
rests against the plate (E) (6).
3.
The load may now be lifted, paying careful heed to maintaining constant tension
on the chains and/or cables.
4.
As soon as the load is at its destination let the crane hook descend until the clamp
is fully free of load, meaning that the lifting chain is no longer taut.
5.
The clamp may now be removed from the load. A crowbar may be used placed
between the ridges of the body. This will allow the clamps to be simply turned
away under the plate (7).
1.4
A reliable clamp, a secure basis for lifting
10 year warranty preventive maintenance procedure:
Parts should be replaced only when they no longer meet our standards.
10 year warranty repair procedure:
During every repair service the most critical parts, being pressure pads and, when
necessary, any rejected parts will be replaced.
Please consult www.crosbyip.com/warranty for more information on maintenance
procedures.
Maintenance without 10 year warranty: Annually clamps are subjected to inspection*
and parts will be replaced only when they no longer meet our standards.
*CrosbyIP authorised repairer
Copyright © 2013 The Crosby Group LLC. All Rights Reserved.
GEbrUikErShANdLEidiNG
Voor klemtypes:
iPhnm10
Horizontaal hijsen met voorspanning, zonder beschadigingen
iNdEx
1.
1.1
1.2
1.3
1.4
Een betrouwbare klem, een goede basis voor hijsen
© The Crosby Group LLC. Niets uit deze originele gebruiksinstructie uitgave mag, op geen enkele
wijze, worden verveelvoudigd en/of openbaar gemaakt zonder voorafgaande schriftelijke toestem-
ming van The Crosby Group LLC.
Copyright © 2013 The Crosby Group LLC. All Rights Reserved.
Algemeen
10
veiligheidsvoorschriften
10
inspectieprocedures
11
Gebruik van de klem
12
12
NL
09