Preliminary
checks
we recommend filling the tub with al-
ready mixed water (hence, not boiling
water first followed by cold water)
recommendations
The higher the water temperature,
the less time must be spent in the tub
34-36 °C / 20 minutes
36-38 °C / 15 minutes
38-40 °C / 10 minutes
bath salts
F
irst of all, it is necessary to fill the tub.
some
■ Once immersed in the tub, the water level must fully cover the jets.
~ 3 cm
■ Technically, the duration of the Swirlpool® function varies from 15 to 20 minutes. How-
ever, the initial effects can be felt after just 5-10 minutes: you will feel revitalised and less
stressed; your muscles will be more toned; and you will experience a general sense of
wellbeing.
The duration of the function depends greatly on the water temperature. In order to
allow the body to get used to the function, begin with a session which does not exceed
10 minutes, and continue until you reach a duration which is suited to your individual
requirements.
■ Soap and bath foams must only be used when the Swirlpool® function is not in use, as
though you were using a normal bathtub.
Jacuzzi®
■ Jacuzzi® bath salts should be poured into the specific container. Do this either before
activating the Swirlpool® function or during the function (please see the relevant section).
23