installation guide
STEP 1
With the help of an able-bodied assistant, place the box on the
floor with the top of the box facing up.
Remove the binding straps and packing materials, making sure
not to puncture the box with any sharp objects.
STEP 2
Remove the bed base from the box. Unfold the base while
keeping the bottom of the base facing upwards.
STEP 3
To install headboard brackets (sold separately)
see instructions on page 17.
To install the legs, thread the washer over the screw on the leg.
Next, screw the leg into the nutsert on the frame.
Do not over tighten.
10
Always use two people when setting up the base.
For customer support, visit www.ergomotion.com or call: 888-550-3746
The 3-in-1 legs untwist into separate sections for custom leg
height options.
STEP 4
To sync two bases, see page 14-15.
Locate the battery backup box.
Store the battery backup box in a
convenient location for emergency use.
For operating instructions, see page 13.
STEP 5
Uncoil input cord (connected to control box's
power port) and plug into power supply.